Picture and details of Cisco EPC3825

Front

  1. Power-ON: the LED will be on and NOT blinking in normal circumstances
  2. DS-ON: the LED will be on and NOT blinking in normal circumstances
  3. US-ON: the LED will be on and NOT blinking in normal circumstances
  4. ONLINE-ON: the LED will be on and NOT blinking in normal circumstances
  5. ETHERNET 1-4 - ON: will be green stays on when connected to a computer and will start blinking when in use (will be orange when the LAN speed reaches 10/100)
  6. USB – ON: will be on and NOT blinking when there is a device connected at the USB port and will start blinking when there’s data transmission.
  7. WIRELESS LINK-ON: will be on and green when Wireless AP is in use and will blink rapidly when there’s data transmission.
  8. WIRELESS SETUP – OFF: will NOT be on in normal circumstances and will start blinking when it is activated due to adding wireless clients to the wireless network.

Back

  1. Power-/12VDC
  2. ON/OFF Switch
  3. MAC ADDRESS LABEL
  4. USB slot
  5. ETHERNET ports for RJ-45 LAN lines
  6. F-Connector for line cable
  7. WIRELESS SETUP is pressed to add WPS to wireless clients
  8. RESET is pressed and held for a few seconds to Reboot EMTA ,and for more than 10 seconds to reset factory

Download File

Was this helpful?

Very bad Very Good